4068 Job openings found

Designation in Organization: - PPC Engineer (Production Planning & Control)    Education: BE Electrical or Electronic / Electrical / Mechanical   Gender: Male   Responsibilities & Authority: •Capacity Planning for production of particular Shop Floor •To Monitor & do the production planning according to the customer schedule •To Monitor the Raw Material availability as per planning  •To Monitor monthly & weakly production planning •To co-ordinate with stores and purchase dept. and ensure availability of raw material required to achieve dispatch plan. •To co-ordinate with design dept. and ensure updated documents are made available for production on the shop floor •To co-ordinate with PED to ensure that all circuit testing boards and final assembly boards are timely validated and made available as per production plan. •To prepare the dispatch plan as per customer schedule. •To release the dispatch plan to production dept. •To ensure that a viable production plan has been prepared by the production team in accordance with a dispatch plan •To release a kitting plan to the store's department in accordance with the production plan. •To communicate with marketing dept. if any changes are made in the production plan that could affect the planned dispatch date. •To communicate with the design department about the output of the process feasibility analysis conducted by production dept. so that changes, if required, can be made in documents to be issued to production. •To maintain the record of the date and production order from which each change in engineering specifications is implemented in production. •To release current mod list to production and quality dept. after every MIN Meeting conducted by design dept.  •To release production orders in SAP as per plan and provide a cutting label for production. •To ensure timely confirmation of production in SAP. •To ensure that FG stocks in BSR coincide with that in SAP system. •To communicate to all concerned dept. ( Prod, Mkt and QA) regarding packed quantity on a daily basis •To ensure that packing of FG is done within shift time. •To ensure that daily production data update on display board and also update it in softcopy. •To Monitor & do measurement Of Production Objectives  •To Work in PP & MM module of SAP  •To Maintain the stock in SAP  •To Match the physical raw material stock & SAP stock  •Play an important role in WIP (STOCK) as coordinator for production & account dept. •Monitor Schedule Vs. Compliance of production •To take responsibility as an associate member in KK pillar. •Monitoring Daily Attendance & data of operator, also coordinate with HR dept. for the same.  •OEE monitoring. •Plan v/s Actual monitoring. •Scrap monitoring. •Monitoring TPM activity of production department. •Monitoring ISO & TS activity of production department. •To coordinate with purchase, Store & account dept. for new material requirement •To communicate with supervisors & line leaders of the respective section (ACC, LPC, ASSEMBLY) •To maintain KAIZEN & coordinate with QMS Dept. for the same •To prepare MRM Presentation •To make stage wise identification   Job Location: Shendra MIDC, Aurangabad   for more details call on 7249840222 / 9765567505

Designation in Organization: - PPC Engineer (Production Planning & Control)    Education: BE Electrical or Electronic   Gender: Female   Responsibilities & Authority: •Capacity Planning for production of particular Shop Floor •To Monitor & do the production planning according to the customer schedule •To Monitor the Raw Material availability as per planning  •To Monitor monthly & weakly production planning •To co-ordinate with stores and purchase dept. and ensure availability of raw material required to achieve dispatch plan. •To co-ordinate with design dept. and ensure updated documents are made available for production on the shop floor •To co-ordinate with PED to ensure that all circuit testing boards and final assembly boards are timely validated and made available as per production plan. •To prepare the dispatch plan as per customer schedule. •To release the dispatch plan to production dept. •To ensure that a viable production plan has been prepared by the production team in accordance with a dispatch plan •To release a kitting plan to the store's department in accordance with the production plan. •To communicate with marketing dept. if any changes are made in the production plan that could affect the planned dispatch date. •To communicate with the design department about the output of process feasibility analysis conducted by production dept. so that changes, if required, can be made in documents to be issued to production. •To maintain the record of the date and production order from which each change in engineering specifications is implemented in production. •To release current mod list to production and quality dept. after every MIN Meeting conducted by design dept.  •To release production orders in SAP as per plan and provide a cutting label for production. •To ensure timely confirmation of production in SAP. •To ensure that FG stocks in BSR coincide with that in SAP system. •To communicate to all concerned dept. ( Prod, Mkt and QA) regarding packed quantity on the daily basis •To ensure that packing of FG is done within shift time. •To ensure that daily production data update on display board and also update it in softcopy. •To Monitor & do measurement Of Production Objectives  •To Work in PP & MM module of SAP  •To Maintain the stock in SAP  •To Match the physical raw material stock & SAP stock  •Play an important role in WIP (STOCK) as coordinator for production & account dept. •Monitor Schedule Vs. Compliance of production •To take responsibility as associate member in KK pillar. •Monitoring Daily Attendance & data of operator, also co-ordinate with HR dept. for the same.  •OEE monitoring. •Plan v/s Actual monitoring. •Scrap monitoring. •Monitoring TPM activity of production department. •Monitoring ISO & TS activity of production department. •To coordinate with purchase , Store & account dept. for new material requirement •To communicate with supervisors & line leaders of respective section (ACC , LPC, ASSEMBLY) •To maintain KAIZEN & coordinate with QMS Dept. for the same •To prepare MRM Presentation •To make stage wise identification   Job Location: Chitegaon MIDC , Aurangabad   for more details call on 7249840222

  Job description QC/QA/Senior Project Executive Male 6 1 to 8 B.Sc Ci pet /Diploma/Plastic Collect/receive samples of raw materials, Material in process, finished products, waste water at different stage of ETP/STP/RO plant solid waste generated from the manufacturing process, segregate to different groups. Responsible to carry out test all the samples collected/received as per the provided slandered ...

Production Planner Responsibilities: Evaluating purchase orders to create suitable production schedules. Estimating the amount of material, equipment, and labor required for production. Promptly addressing and resolving production issues to minimize delays in production. Coordinating production operations in accordance with material, labor, and equipment availability. Recommending viable solutions to reduce production costs as well as improve ...

Job Summary: The Shift In charge cum Production Senior Executive is responsible for managing and coordinating production activities during a designated shift. This includes overseeing the work of production staff, ensuring efficient operations, maintaining quality standards, and meeting production targets. The role involves a combination of leadership, planning, and execution to ...

Job Description Responsibilities  Coordinating and reporting day-to-day activities with the Production Manager  Assisting in preparing production schedules and timelines  Estimating the costs of the production process, raw materials, and other equipment  Ensuring that the quality and company standards are met  Coordinating with the team members to ensure the production process is completed on time  Checking the inventory ...

JOB SUMMARY Production engineer is responsible for controlling and improving production at factory. The prime responsibility of Production Engineer is developing strategies to improve efficiency and increase profitability.      JOB RESPONSIBILITY Ensures the functionality of production equipment and machinery to improve productivity and minimise the production cost. Work with a team of product designers to ensure ...

Job description HPS-68 Production Planing Male 1 2 to 2 B.E Mechanical / DME Roles and Responsibilities   Plan production task in the best possible manner along with the proper systematic planning of production activities & ensure Orders are manufactured within scheduled deadlines Work with management in coordinating and planning production activities to improve runtime. Monitor production progress and ensure that ...

Production Supervisor (Machine Shop)  Experience: Min 5 Years in Heavy Machinery Manufacturing Industry (CNC, VMC, HMC,) Salary budget: up to 4.50 LPA Education: BE / DME Profile Summary: Optimizing plant performance and meet production/ dispatch targets with quality commitments. Possess Greenfield project handling experience in Automotive, Aerospace & Heavy Engineering component machining line planning, execution, and establishment. Demonstrate in Production Planning, Production System Implementation, Process Improvement, Production schedules, Production development, Managing tool life, Quality control & Inspection, ISO/TS system, AS9100, FMEA, ...

Production Manager (Machine Shop)  Experience: Min 10 Years in Heavy Machinery Manufacturing Industry (CNC, VMC, HMC,) Salary budget: up to 10 LPA Education: BE / BE tech  Profile Summary: Optimizing plant performance and meet production/ dispatch targets with quality commitments. Possess Greenfield project handling experience in Automotive, Aerospace & Heavy Engineering component machining line planning, execution, and establishment. Demonstrate in Production Planning, Production System Implementation, Process Improvement, Production schedules, Production development, ...