1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.20 LPA
Job Description:
Post: Sr. Engineer - QA
Education: BE/ Dip (Mech)
Keywords: Press shop department experience candidates should be preferred
Job Profile
HAndle Customercomplaints and knowledge about IPO, PPAP, SPC, and ISO Audit.
Conducting Process Audit, Product Audit, Supplier Audit as per plan.
Monitoring & reviewing the SPC study, process FMEA and MSA study on monthly basis.
Control of documents and records as stipulated in quality system procedures includes the issue of controlled copies.
Monitoring In-Ward & Final Inspection.
1st piece in process inspection report & taking C.A. if any.
In handling customer complaints and their solutions.
To maintaining quality related document calibration report, Inspection report and etc.
To take follow up on supplier corrective action reports.
Preparing the control plan of In-Ward, Final& In-Process component.
Preparing PPAP, PFMEA for new development components
Do SPC to check process capability.
Vendor Audit & internal audit and online production inspection.
Handling Quality team for in-process inspection.
Prepare Monthly data for MRM. ï‚· ...
1 Opening(s)
0 To 1.0 Year(s)
1.50 LPA TO 2.00 LPA
Qualification : B.E / DME (Electrical/ Electronics)
Experience: 0-1Years
Key Responsibilities
Technical Feasibility Documentation
1. Part manufacturing feasibility, machining feasibility, forging manufacturing feasibility, quantum raw materials required. Defining packaging standards, DPAR- design product availability review.
New Product Production Supervision
1. Supervising the production activity of First 3 batches to ensure smooth production process and lower PPM. Setting approval ...
1 Opening(s)
2.5 Year(s) To 5.0 Year(s)
3.00 LPA TO 5.00 LPA
Job Title :Project Engineer
Division/ Functions : RFQ Cell Dept
Direct reporting To : DGM
Qualification : B.E (Mechanical) / DME / ITI
Experience: 3-5 Years
Key Responsibilities
Technical Feasibility Documentation
1. Part manufacturing feasibility, machining feasibility, forging manufacturing feasibility, quantum raw materials required. Defining packaging standards, DPAR- design product availability review.
New Product Production Supervision
1. Supervising the production ...
1 Opening(s)
10.0 Year(s) To 12.0 Year(s)
12.00 LPA TO 14.00 LPA
Responsible for New Product Development, In-process, Final Inspection & Customer Quality.
Process Audit & implementation of corrective & preventive action for continuous improvement & minimizing online defects.
Responsible for Customer complaint analysis & submit action plan to customer in 5 rule sheet formats.
Responsible for new gauge Design for In process & Final ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
6.00 LPA TO 8.50 LPA
Process Improvement through Kaizen Activities on Shop Floor.• To develop the gauges & fixtures for New Part.• Joint Inspection with customer for approval of part for mass production.• Sample Preparation & timely submission to customer.• PPAP Lot Run & Submission as per the timeline given by customer.• Responsible daily , ...
1 Opening(s)
3.0 Year(s) To 10.0 Year(s)
4.00 LPA TO 6.00 LPA
Improve supplier quality by implementing supplier development initiatives such as supplier audits, Trainings, supplier scorecards, 8Ds etc.
Develop parts. Ensure on time and first time right. Follow PPAP process.
Drive cost reduction programs through VAVEs at supplier end.
Monitor and improve product quality using various tools such as customer feedback, product and process ...
1 Opening(s)
4.0 Year(s) To 8.0 Year(s)
Not Disclosed by Recruiter
Qualification: Diploma or BE in mechanical, Production with 4 years experience for QMS activity.Experience: min 4 years and above.Work location: Chakan in Pune
Job description:Internal Auditor Knowlege of PPAPInternal system AuditProcess and product AuditControl of Documents Master and control copies. Basic knowlege of SPC and MSA, contengency planMRM meeting and agenda making, etcLead ...
1 Opening(s)
10.0 Year(s) To 25.0 Year(s)
Not Disclosed by Recruiter
Qualification: BE/Diploma in Mechanical / Metallurgy/productionLocation: Chakan, PuneExperience: 10 to 25 Years from CI/SGI castings production / Foundry Notice Period: Serving notice / max one month
Job Requirement:Should be responsible for incoming material inspection, in-process inspection, and final inspection in the foundry industry.Required to be aware of all Green sand foundry ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
2.00 LPA TO 3.00 LPA
Hiring for New Product Development ( NPD ) Engineer for Waluj Aurangabad locationCompany Type : sheet metal stamping and fabrication manufacturing industryEducational Qualifications: BE Mechanical / DME Desired Experience: Min 3 years experience Skills Set required/Job Profile :
New products carrying all the activities from product conceptual stage to customer approval, Product validation, PPAP & Smooth ...
1 Opening(s)
3.0 Year(s) To 6.0 Year(s)
Not Disclosed by Recruiter
Qualification: Btech in Mechanical, Production, AutomobileExperience: 3 to 5 yrsLocation: Preferred Delhi NCR / Greater NoidaDepartment: Research & DevelopmentIndustry- Automobile Industry /Manufacturing Industry.
Job descriptionHands on experience for Rack rolling & Circular Rolling Setups and troubleshooting.New racks developments and Rack Drawing approvals.Hands on experience for Gear cutting/ Machining processes like gear ...