1 Opening(s)
15.0 Year(s) To 20.0 Year(s)
20.00 LPA TO 25.00 LPA
Major Challenges1. To continuously strive for achieving reduction in consumption ratios of rawmaterials and optimum use of Steam and Power to achieve lowest cost of production.2. To maximise Sodium Sulphate recovery and to reduce acid consumption byreducing losses and satisfy the internal and external customer needs.3. Maintain salt quality parameters ...
3 Opening(s)
1.0 Year(s) To 4.0 Year(s)
2.00 LPA TO 4.00 LPA
Location of Role Shift Engineer CPPRole, job contents,scope, responsibilities
Operation and maintenance of ‘AFBC’ Boiler and auxiliary, Operationand maintenance of ‘Steam turbine’ and auxiliary, Operation andmaintenance of balance of plant Like : CHS, CT, DG Set, WTP. ,Knowledge of MS office for generating Daily MIS
Likely position/Title OfficerReporting to HODEducation Expected AcceptableITI ...
2 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 5.00 LPA
Location of Role Shift Engineer CPPRole, job contents,scope, responsibilities
Operation and maintenance of ‘AFBC’ Boiler and auxiliary, Operationand maintenance of ‘Steam turbine’ and auxiliary, Operation andmaintenance of balance of plant Like : CHS, CT, DG Set, WTP. ,Knowledge of MS office for generating Daily MIS
Likely position/Title OfficerReporting to HODEducation Expected AcceptableBE ...
5 Opening(s)
3.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 12.00 LPA
Location
Jharsuguda, Odisha
Plant Details
4x600 MW IPP
Job Profile
Responsible for operating Main Plant & Auxiliary systems using DCS Panel and Control Room MIMIC Panels.
Should have knowledge in Emergency handling including Blackout.
Should have experience in monitoring equipment operations through routine observation, recording & evaluation of data.
Qualification
BE / B Tech from a recognized university.
PG Diploma ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
Not Disclosed by Recruiter
Injection Molding Machine Operating Engineer
Qualification: CIPET –DPT
Experience: 3-5 Years
Job Description:
Willing to work in 3 shifts.
1.Operation of injection molding machinery.
2.Visual inspection of produc
Injection Molding Machine Operating Engineer
Qualification: CIPET –DPT
Experience: 3-5 Years
Job Description:
Willing to work in 3 shifts.
Operation of injection molding machinery.
Visual inspection of produced components for quality control ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
3.00 LPA TO 4.50 LPA
A client company is auxiliary equipment supplier.
job position: Service Engineer
Region: Gujarat
Experience needed:2 to 5 years in service profile
Role & responsibility: maintenance of equipment
preventive breakdown
maintenance of auxiliary equipment break down maintenance.
function: maintenance, commissioning, repair, preventive maintenance
skills: trouble shooting ,reparing ,technical knowledge, equipment checking
1 Opening(s)
10.0 Year(s) To 20.0 Year(s)
Not Disclosed by Recruiter
Minimum 10-12 years of experience out of which minimum 04-05 yrs of experience needs to be in the similar profile
FPSO experience is must.
BE in Mechanical / Electrical /Instrumentation. But Mechanical background will be given preference
If the candidate is from Marine background, he should be holding valid Indian Coc of Chief ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Job Description :- Responsible for all instrument and control system equipment regular maintenance and repairing, such as all field instrumentation, valves, flow meter, transmitter, control circuit, monitoring,DCS, PLC etc.
A turbine DCS operator may perform the following duties:
Design, install, maintain, and troubleshoot the DCS
Maintain and repair instrument and control system equipment
Record ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
1.80 LPA TO 3.00 LPA
Job Description :- Responsible for all instrument and control system equipment regular maintenance and repairing, such as all field instrumentation, valves, flow meter, transmitter, control circuit, monitoring,DCS, PLC etc.
A turbine DCS operator may perform the following duties:
Design, install, maintain, and troubleshoot the DCS
Maintain and repair instrument and control system equipment
Record ...
4 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.00 LPA
JOB DESCRIPTION
Operate and control boiler systems, including coal-fired boilers, biomass boilers, or other types of boilers, to produce steam for electricity generation.
Monitor boiler parameters, such as water level, steam pressure, temperature, and fuel flow, using control systems and instrumentation to maintain optimal operating conditions.
Execute start-up and shutdown procedures for boilers ...