1 Opening(s)
5.0 Year(s) To 8.0 Year(s)
4.00 LPA TO 6.00 LPA
BE/M.E in Mechanical Eng with 5 to 8 years experience
Should be thorough in welding technology & familiar with third party inspection.
Should have at least level 2 qualification in VT (Visual Testing) & PT (NDT) with knowledge of international codes like ASME and DINS Standard exposure to “U” stamp certification
For more ...
1 Opening(s)
7.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 9.00 LPA
Position: Asst. Manager/Sr. Executive - Purchase
Location: Mulund - Mumbai
Experience: 7 - 10 Years
Industries: Chemical
Key Responsibilities:
Must have experience of Project/Engineering items, spares, consumables procurement.
Procurement of pipes and fittings items, pumps, heat exchanger, tanks, reactors, dryers and filters.
Procurement of Instruments, Electricals and safety items ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.00 LPA
Responsibilities:
Perform welding tasks including but not limited to fabrication, repair, and modification of structural components, pipelines, and machinery used in the sponge iron production process.
Interpret blueprints, drawings, and specifications to determine welding requirements and procedures.
Operate welding equipment such as arc welders, gas torches, and plasma cutters in a safe and ...
2 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 2.40 LPA
Responsibilities:
Perform welding tasks including but not limited to fabrication, repair, and modification of structural components, pipelines, and machinery used in the sponge iron production process.
Interpret blueprints, drawings, and specifications to determine welding requirements and procedures.
Operate welding equipment such as arc welders, gas torches, and plasma cutters in a safe and ...
1 Opening(s)
3.0 Year(s) To 8.0 Year(s)
2.00 LPA TO 4.00 LPA
Diploma Mechanical/ Diploma Fabrication Technology/ BE Mechanical.
Exp :- 2 years to 3 years Max and not beyond that.
Should have Exp in Drafting(2D) and understanding of ASME design codes.
Prefablely should be able to ready Pv-elite reports and co-relate with drawings been prepared.
Good Communication skill would be add on.
Must be pro-active.
3 Opening(s)
3.0 Year(s) To 10.0 Year(s)
3.00 LPA TO 5.00 LPA
NDT Certified
Knowledge of WPS, WPQ, PQR
Welding Process (Specially GMAW)
Have a skill to interpret structure drawing /code(IS,ASME,AWS,ASTM etc.,)
Inspect/monitor fit up, weld visual, final dimension inspection, blasting & painting etc
Ability to maintain documentation as per approved specification/quality assurance plan/code.
Structural Fabrication Must- Pre Engineering Building Preferred
All kind of QC Inspection(including Material inspection, fabrication work, ...
1 Opening(s)
5.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
Key Skills Required (Software knowledge / Specific skills ) Piping Layout 5+ 3D Modelling in S3D / E3D,Support modeling, Piping studies of Column, exchanger and Pump , compressor ,Review of Vendor drawings, Checking of Isometrics, preparation of SPM Data sheet Piping Stress 5+ Stress calculation in CAESAR II, Rack / ...
20 Opening(s)
2.0 Year(s) To 10.0 Year(s)
2.00 LPA TO 9.00 LPA
Candidate is Must [ NDT (Leval 2) ] & have knowledge of RT, PT & MT
Must have knowledge of Basic Fabrications of Tank, Vessels
Can Perform Stage inspection as per drawing
Can prepare reports of inspection
Must understand drawings & can perform stage inspection
Can collect data and prepare report for ASBUILT drawing
Can Handle ...
4 Opening(s)
8.0 Year(s) To 15.0 Year(s)
Not Disclosed by Recruiter
JOB KNOWLEDGE:
Experience with major commodities typically procured for global business unit projects recognized Codes and Standards, manufacturing methods, inspection/examination/testing techniques, and technical document review and implementation.
Requisite certification as an ANSI/ASME Level II (further to Level I competencies), ASNT Level II in RT/UT/PT/MT/VT and performs the following:
...
2 Opening(s)
15.0 Year(s) To 25.0 Year(s)
Not Disclosed by Recruiter
Primary Responsibilities:
Produce engineering deliverables including drawings, material take offs, checklists, deliverables lists, etc. for the execution of storage tank, sphere, and low temperature and cryogenic tank (LT&C) projects.
Work closely with RE/Lead Engineer in the production of detailed drawings from design sketches.
Utilize 2D and/or 3D CAD to generate fabrication and installation drawings.
Generate ...