1 Opening(s)
1.0 Year(s) To 3.0 Year(s)
2.40 LPA TO 3.00 LPA
CMM(Co-ordinate Measuring Mchine)
Responsible for monitoring in-process inspection and final inspection.
Hands on experience of using highly precision, calibrated instrument like Vernier caliper, Micrometer, Height gauge, TRIMOS (Mitutoyo), Surface finish tester (Mitutoyo), UTM etc.
Involves in In-house rejection analysis by Preparing quality document like Trend chart, Pareto charts and Corrective & preventive action ...
2 Opening(s)
6.0 Year(s) To 10.0 Year(s)
5.00 LPA TO 9.00 LPA
To carry out process inspection & Standard Room Inspection.
Control of Non Conforming product, customer complaint
Rejection minimization through kaizen & 5S.
To prepare process audit of hobbing operation.
To prepare process audit of shaving operation.
To prepare process audit of grinding operation
To prepare 1st Approval of hobbing, shaving, grinding & hard turning operation.
To prepare calibration of Instrument Micrometer, Vernier etc.
To prepare calibration & operating P40, P65,cnc gear tester.
To prepare calibration & operating Mahar & Maag manual gear tester.
Active co-ordination with production Deptt.
To prepare calibration & operating Osaka & Osaka clp35E cnc gear taster.
Responsible for final inspection.
Maintain 5S system.
Maintain document as per requirement of ISO/TS 16949.
 MSA. Knowledge
INSTRUMENT
HANDLING:
Vernier Caliper, Micrometer, Height gauge.
Bore gauge,Air snap gauge,Air plug gauge.
Roundness taster.
Roughness taster.
1 Opening(s)
0 To 1.0 Year(s)
1.50 LPA TO 1.68 LPA
Position: Maintenance Fitter
Location: Vapi
Experience: Fresher
Industries: Pharma
Responsibilities:
To manage day to day maintenance of the plant.
Fault finding of all mechanically performed Equipment’s.
Preventive & Breakdown Maintenance of all utility & process equipment’s to be carried out & recoded as per check list.
Co-ordination with other ...
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
4.00 LPA TO 4.20 LPA
Position: Maintenance Fitter
Location: Sanand - Ahmedabad
Experience: 2 - 5 Years
Industries: Chemical
Responsibilities:
To manage day to day maintenance of the plant.
Fault finding of all mechanically performed Equipment’s.
Preventive & Breakdown Maintenance of all utility & process equipment’s to be carried out & recoded as per ...
2 Opening(s)
2.0 Year(s) To 3.0 Year(s)
1.44 LPA TO 2.04 LPA
Position: Maintenance Fitter
Location: Umbergoan near by vapi
Experience: 2 - 3 Years
Industries: Plastic
Responsibilities:
To manage day to day maintenance of the plant.
Fault finding of all mechanically performed Equipment’s.
Preventive & Breakdown Maintenance of all utility & process equipment’s to be carried out & recoded as ...
1 Opening(s)
10.0 Year(s) To 15.0 Year(s)
5.00 LPA TO 9.00 LPA
Location :- Markal / Moshi
Deep knowledge of tooling.Knowledge of reading drawings.Knowledge of Fixture accessories must.Knowledge of cutting parameters on machines.Knowledge of SOP.Knowledge of CNC operating panel buttons.Knowledge of Vertical Machine Centre.Knowledge of Offset.Knowledge of measuring instruments.Good Analytical & problem-solving skills.Working knowledge with Micrometer, Jyoti, BFW.Handled minimum 10 machines.Good communication skills.
1 Opening(s)
2.0 Year(s) To 5.0 Year(s)
2.00 LPA TO 3.00 LPA
We are looking for a qualified QC Line Inspector to join our dynamic team at our factory in Bhagwanpur,Roorkee. As a QC Line Inspector, you will play a crucial role in ensuring the quality of our productsthrough systematic inspection processes.1. Quality Control Conduct thorough inspections of production lines to ensure ...
1 Opening(s)
3.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 2.64 LPA
Position: Maintenance Fitter
Location: Umbergoan near by vapi
Experience: 3 - 5 YEARS
Industries: Plastic
Responsibilities:
To manage day to day maintenance of the plant.
Fault finding of all mechanically performed Equipment’s.
Preventive & Breakdown Maintenance of all utility & process equipment’s to be carried out & recoded as ...
1 Opening(s)
6.0 Year(s) To 10.0 Year(s)
8.00 LPA TO 10.00 LPA
CMM-CALYSPO (Windows based software used in 3Dco-ordinate measurement m/c for inspection) Uses Roughness tester Mahr model, Used to measurement of surface roughness parameters and Counter parameters of components of Engine parts
Monitoring and controlling of receipt material inspection (Machining, casting, Sheet metal, Molding & Rubber components) and also approved the inspection ...
1 Opening(s)
4.0 Year(s) To 5.0 Year(s)
2.40 LPA TO 3.60 LPA
JOB DESCRIPTION
Production
Male
1
4 to 5
BE Mechanical / DME Mechanical
Salary : 20000 to 30000
Location : Umbergaon Gujarat
Roles and Responsibilities
To measure dimensions using Vernier, Micrometer & VMM machine.
Should have Knowledge in SPC, 8D, read & understand engineering drawings , rejection analysis.
Knowledge of ISO documents.
Desired Candidate Profile
Diploma in Mechanical engineering